Comments on: Replacement bed slats http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/ Economics, Business, Telecoms, Tech and Gadgets Sat, 06 Mar 2010 02:23:16 +0000 hourly 1 http://wordpress.org/?v=3.0-alpha By: saj http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-972 saj Wed, 09 Sep 2009 09:45:49 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-972 even if your wooden slats are not broken you should buy some more to fill in the gaps as this will prolong the life of your mattress especially if you have a spring coil mattress as the springs eventually will push through the gaps. even if your wooden slats are not broken you should buy some more to fill in the gaps as this will prolong the life of your mattress especially if you have a spring coil mattress as the springs eventually will push through the gaps.

]]> By: Julian Baker http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-722 Julian Baker Wed, 10 Jun 2009 20:10:28 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-722 after finding this great blog page by paul 'thanks paul' i cant reccomend bishops beds enough its so hard to find replacement curved slats for my leather bed but not a problem with bishops beds i bought some new slats to replace the damaged ones and all the plastic clips for the entire bed now my bed frame is like new again ahhhh good nights sleep in store you might have to cut the wood down to the correct size but that only takes a short time with a small saw plus the replacement wooden slats and clips seem better quality than the original ones that came with the bed now i have kept some spare parts under my bed in case i break another slat in the future thank wendy you really made my day ( : 10 out of 10 for bishops julian (worthing/w sussex) after finding this great blog page by paul ‘thanks paul’
i cant reccomend bishops beds enough
its so hard to find replacement curved slats for my leather bed
but not a problem with bishops beds
i bought some new slats to replace the damaged ones and all the plastic clips for the entire bed
now my bed frame is like new again ahhhh good nights sleep in store
you might have to cut the wood down to the correct size but that only takes a short time with a small saw
plus the replacement wooden slats and clips seem better quality than the original ones that came with the bed
now i have kept some spare parts under my bed in case i break another slat in the future
thank wendy you really made my day ( :
10 out of 10 for bishops
julian (worthing/w sussex)

]]> By: JANET KELLY http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-689 JANET KELLY Sun, 17 May 2009 16:31:59 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-689 i will be calling bishops first thing in the morning :) my fiance also likes to dive on the bed from the door. and we also have 4 broken slats AND COUNTING ;) i think i'll get the 10 pack in advance lol great blog, thank you! jan my last comment here :) "it must be a 'man thing' the slats don't break when i get in" lol :) i will be calling bishops first thing in the morning :)
my fiance also likes to dive on the bed from the door. and we also have 4 broken slats AND COUNTING ;)
i think i’ll get the 10 pack in advance lol

great blog, thank you!
jan

my last comment here :)
“it must be a ‘man thing’ the slats don’t break when i get in”
lol :)

]]> By: Paul Maunders http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-684 Paul Maunders Thu, 14 May 2009 12:07:51 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-684 No problem Wendy - Your company provides great products and customer service, so I am more than happy to be recommending you on my blog! No problem Wendy – Your company provides great products and customer service, so I am more than happy to be recommending you on my blog!

]]> By: Wendy @ Bishops Beds http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-681 Wendy @ Bishops Beds Wed, 13 May 2009 22:23:23 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-681 Hi Paul, Hope you're keeping well. We've had a lot of leads and sales from your blog and just want to thank you again. To answer a couple of questions from above - Charlotte - Your best and cheapest bet is to get it from a local DIY store but spend a few pound more to get hardwood if you can as it will last a lot longer and is very unlikely to snap. Chris - To get like for like slats you will have to go to either a timber merchant or good DIY store but you could have sprung slats in a frame which just sits into your bed. Get in touch if you'd like more information. If anyone would like to contact us at Bishops Beds then you can get us on the following - Tel: 0191 5860010 Email: sales@bishopsbeds.co.uk Web: www.bishopsbeds.co.uk And thank you to everyone who has left to nice comments above, we look forward to continue offering the same service to any future customers, new and old!! Thanks Wendy Hi Paul,

Hope you’re keeping well. We’ve had a lot of leads and sales from your blog and just want to thank you again.
To answer a couple of questions from above -

Charlotte – Your best and cheapest bet is to get it from a local DIY store but spend a few pound more to get hardwood if you can as it will last a lot longer and is very unlikely to snap.

Chris – To get like for like slats you will have to go to either a timber merchant or good DIY store but you could have sprung slats in a frame which just sits into your bed. Get in touch if you’d like more information.

If anyone would like to contact us at Bishops Beds then you can get us on the following –

Tel: 0191 5860010
Email: sales@bishopsbeds.co.uk
Web: http://www.bishopsbeds.co.uk

And thank you to everyone who has left to nice comments above, we look forward to continue offering the same service to any future customers, new and old!!

Thanks

Wendy

]]> By: Mrs Evans http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-607 Mrs Evans Tue, 31 Mar 2009 18:28:33 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-607 Good evening, I have ordered sprung bed slats and a memory foam mattress from Bishops beds and must say the service they provided has been absolutley fantastic. Many thanks to this forum as I discovered Bishops from here. Good evening,

I have ordered sprung bed slats and a memory foam mattress from Bishops beds and must say the service they provided has been absolutley fantastic.

Many thanks to this forum as I discovered Bishops from here.

]]> By: Lorraine http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-587 Lorraine Wed, 18 Mar 2009 00:04:39 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-587 Hello Paul, On Sunday I read your blog about Bishop's Beds, followed the link, ordered some suspension cups for slats - just 30p each - and they arrived Tuesday, fabulous service. Thank you for your help it was invaluable. Lx Hello Paul,

On Sunday I read your blog about Bishop’s Beds, followed the link, ordered some suspension cups for slats – just 30p each – and they arrived Tuesday, fabulous service.

Thank you for your help it was invaluable.

Lx

]]> By: Paul Maunders http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-538 Paul Maunders Fri, 20 Feb 2009 15:38:24 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-538 Hi Jane, The website address for Bishops Beds is: http://www.bishopsbeds.co.uk/ Thanks, Paul Hi Jane,

The website address for Bishops Beds is:
http://www.bishopsbeds.co.uk/

Thanks,
Paul

]]> By: Jane http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-535 Jane Fri, 20 Feb 2009 11:02:21 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-535 saw your blog about sprung slats and Bishop Beds, need some for my 6ft bed, but cant find their website, can you advise me of it or a phone number, they sound very good. Thanks saw your blog about sprung slats and Bishop Beds, need some for my 6ft bed, but cant find their website, can you advise me of it or a phone number, they sound very good.
Thanks

]]> By: Chris http://www.pyrosoft.co.uk/blog/2008/03/30/replacement-bed-slats/comment-page-1/#comment-501 Chris Wed, 11 Feb 2009 11:35:56 +0000 http://www.pyrosoft.co.uk/blog/?p=245#comment-501 I have a mahogany sleighbed 4' 6 that used to have hard wood slats that fitted in a groove running down each side with two cross bars , same wood bolted at each end. Long lost in house moves and now use divan within frame. Want to restore but no idea where to start other than finding wood merchant and get cut to size. The ones in here would not suit - I think, any other ideas? It does not have to be exact match as will not be seen but has to fit frame. Thanks I have a mahogany sleighbed 4′ 6 that used to have hard wood slats that fitted in a groove running down each side with two cross bars , same wood bolted at each end. Long lost in house moves and now use divan within frame. Want to restore but no idea where to start other than finding wood merchant and get cut to size. The ones in here would not suit – I think, any other ideas? It does not have to be exact match as will not be seen but has to fit frame.
Thanks

]]>